עברית

Idan Herbet, industrial designer

I founded Studio Herbet in Rehovot. I work out how to build the central element of a project, the materials, the joints and the build method, for architects and interior designers, and I lead the fabrication and installation all the way. Since 2016 I have worked continuously with architects, interior designers, developers and contractors, across building, design, fabrication, art and execution.

  • 2016The first workshop
  • 4International design awards
Idan Herbet, black-and-white portrait

The thing people remember

Every project produces many pieces, but there is always one that is central. The one you feel when you walk in, and the one that stays with you after you leave. Usually it is also the thing nobody yet knows how to build.

That is where I put all my strength.

The element belongs to the place. You give it the line, and I make sure it stands.

If you have a rendering like this

You know the moment. The client fell in love with the rendering, and at its centre is something none of the project partners has built before.

The contractor doesn't know how to price it, the developer asks how long it will take, and nobody says with confidence "this will be built, like this, on this budget".

Elements like these fall between the architect, the developer and the trades, because each has a part and nobody leads the whole. In the end they are dropped, or scaled down until what gets built is far from what you meant. That is exactly where I come in.

What I understood at Rubinstein

Dana of Oberson Architects wanted a floating piece above the reception desk of the Rubinstein House lobby, 7 metres up: waves of fabric, clean and organic, that also serve as a screen for video art. None of those involved had built anything like it before.

I chose the fabric and tested how it behaves in the light, each panel got a frame of rolled aluminium profiles, and I designed a hidden suspension that the structural engineer approved. Every component was approved before fabrication.

Idan Herbet stands in the lobby looking up at the panels, next to the lift platform
Installation day in the Rubinstein House lobby. The full project, step by step →

That is where I understood the missing role: someone who understands the architect's intent, takes it apart backwards into material, joints and approvals, brings all the trades together around it, and gives everyone certainty on price, time and installation.

How it started

I came to industrial design studies at HIT already as a grown-up, and knew what drew me. From the first year I was in the workshop from morning to evening, rented a workshop outside it as well, and started taking on jobs. That was in 2016.

That is where I learned to think with my hands. In my third year I came across a drywall anchor, a metal tube that changes shape when you screw it in. I cut tubes, weakened and strengthened them, moved on to cardboard rolls, until one of the shapes reminded me of a camping stove. From there I worked backwards, to a stove that opens and closes out of a single metal cylinder.

The research models of the stove on the table, from cardboard to metalThe finished stove, closed in hand, one stainless steel cylinder
Right: the research models. Left: the finished stove. The stove, from the anchor to the product →

Next came the E-DRUM stage: a drummer in the middle, with drums, light and mechanics around him through 360 degrees, on a stage that comes apart and fits in a van.

The E-DRUM stage in performance
The drum stage, from the idea to the show →

Both won A' Design Awards in Italy, and from them my method was born: take an idea that looks almost absurd, start exploring it with the material, and let the material speak. Then go back to the idea, and translate it into something that stands in place.

How I work

The material teaches more than the head.Every project starts with a certainty map: the goal, the space, the budget and the timeline, with a first price range before anyone commits. From there we move on to a model and to tests in the workshop.
Mistakes turn to gold, in the workshop.A mistake in a model is a lesson, and a mistake in the lobby is expensive. So every component is checked and approved separately, including standards and engineering approvals.
The central piece has one father.From the rendering to the installation, and after it, you have one address.
A crew holding rolled aluminum frames over a 1:1 drawing on the lobby floor
Assembly on a 1:1 drawing, before hanging. How it was built at Rubinstein →

Who builds it?

Over the years I have built a network of first-rate workshops and factories. These are people who understand material and design, get excited about something that hasn't been done yet, and like to push the limits. When nobody makes something, I build the tools, the jigs and the machines myself.

  • 3D printing in concrete and plastic
  • Laser cutting
  • Waterjet cutting
  • CNC milling
  • Robotic arm
  • Rolling and bending
  • Casting
  • Plastic injection
  • Metal spinning
  • Press forming
  • Glass
  • Stone working
  • Hardware
Rolled aluminum profiles on a metal workshop bench
Rolled profiles on the metalworker's bench, during the Rubinstein production. The full project →

Outside the studio

I surf, and my schedule follows the forecast. The sea reminds me that we are a small drop in the whole sea, and at the same time the whole sea is in the drop. That is how I see fabrication too: as in nature, nothing comes about on its own.

What I have done

The Rubinstein House lobby with Oberson Architects · Chez Vivie restaurant · The Isrotel Beit Hashekem sample room · The podium in the auditorium of Arnon, Tadmor-Levy with Auerbach Halevy Architects · A' Design, LIT and SIT awards

International design awards

  • SIT Furniture Design Winner · 2020SIT Furniture DesignWinner · 2020
  • LIT Lighting Design Winner · 2019LIT Lighting DesignWinner · 2019

I've had the chance to work with

  • Oberson ArchitectsOberson Architects
  • Ilan Pivko ArchitectsIlan Pivko Architects
  • IsrotelIsrotel
  • Tel Aviv-Yafo MunicipalityTel Aviv-Yafo Municipality
  • AshtromAshtrom
  • Tel Aviv Museum of ArtTel Aviv Museum of Art
  • WeWorkWeWork
  • Peres Center for Peace and InnovationPeres Center for Peace and Innovation
  • Weizmann Institute of ScienceWeizmann Institute of Science
  • Schwartz/Reisman Science Education CenterSchwartz/Reisman Science Education Center
  • Davidson Institute of Science EducationDavidson Institute of Science Education
  • Clore Garden of ScienceClore Garden of Science

Questions architects ask me

At what stage should I get in touch?

As soon as there is a rendering or an idea, and before the tender. The earlier you define what is being built, the more the material, the anchoring and the budget get into the drawings, and the element is not cut along the way.

Do you crack an existing design, or design yourself?

Both. Sometimes there is a rendering, and I work out how to build it. Sometimes I am asked to design the central piece from the start. Any change needed for it to be built, we decide together.

How much will it cost and how long will it take?

That is what the certainty map gives: a first price range and a timeline, in writing, before committing to fabrication.

Why not go straight to a metal shop or a carpentry shop?

Because some of these things don't exist at any metalworker or carpenter. They combine several materials, or need a tool that hasn't been built yet. So I also invent the build method, and test it in the workshop before fabrication.

Who is responsible if something doesn't work after installation?

Me. Whoever has worked with me talks to me after the installation too, because the project has one father, and it's me.

@studio_herbetIdan Herbet, industrial designer

The side of the project nobody photographs

Joints, models and installation days, from the workshop and the site.

Follow @studio_herbet
A floating element in the Rubinstein House lobby, at nightThe E-DRUM stage lit in redGolden Hour casting a sunset on the wallAkirov HouseThe portable gas stove outdoorsThe HOS'A dog sofa in a living room